![]() Tempo sync with division control is the most important to me, followed by program changes. ![]() USB midi is very popular these days and is slightly less hassle than 1/4” midi jacks, but nothing beats the 5-pin MIDI jack tbh. The best example I can think of is the Boss ES5/8, but I chose DA due to size, price, and certain out-of-the-box functionality (Multijack supports Chase Bliss/meris/empress without needing a midi box, for example).Ī final consideration if you’re looking to add MIDI. It would have to offer the same inserts and power as my current one, while adding routing and CC by default. Would I be open to switching to a different controller? Depends. I recently picked up their DMC micro to send midi CC (something the DPC-5 does not do, unfortunately). The core of my board is a DPC-5, which controls 4 midi pedals (presets, exp, tap tempo, tuning, etc) and has a 5-loop bypass looper for any non-MIDI stuff. Feel free to be as vague as you want if this is super secret sauce.Īs for me, I use Disaster Area MIDI products, due to their simplicity of setup, size, and the support they offer to sooo many midi pedals. Rad! To turn this around, are you talking about building a MIDI controller and joining that market OR are you considering adding MIDI functionality into EHX products? Mostly just curious what you are cooking up. A midi-thru would be great to link pedals to each other. They might be a bit fragile, but when pedals are on a board that's not a problem, I like them way better than the big 5pins connectors. As for connections, my system is connected with TRS mini-jack cables. As a coder I'm not afraid of more complex pedals/systems to deal with, so all kinds of extra options with SysEx are totally fine for me. I think digital control to pedals gives you so much more options to play with that it's always a good addition to a pedal. The CV-out of the 8 step is routed back to the Raspberry Pi, so I can control every parameter connected to my system with this sequencer, if I want to. At this moment, the Boss DD-500, HOG2, Bass Whammy and 8-step are connected to this (and some synths). Some pedals already have midi capability so they are connected to the same Raspberry Pi with a usb->midi cable and a midi thru-switch. I use a serial protocol for this, for now I have a resolution of 256 steps, slightly better than midi. To do this I have a Raspberry Pi under my pedal board running some software to control all the pedals via a midi fader/knob controller or the web-browser on my tablet / phone / laptop. So at this moment I can control all the parameters of the Pitch Fork, Canyon, Oceans 11, Ring Thing, Cathedral, Deluxe Memory Boy, Riddle, Super Ego, Super Pulsar, 22500. I don’t think it’s possible but if anyone out there has a secret to controlling the ramp speed on the H9 rotary algorithm I’d love to know, thanks.I think I'm not an average guitar pedal user (I don't use a guitar for example) and don't use midi that much, but I do use a lot of digital controlled pedals.Īs I completely agree with your comment somewhere here that in your opinion a lot of (feature) EHX pedals needs midi, I hacked some of your pedals to add digital control. The exception to this rule is delay algorithms, in which you get latching only. ![]() So with modulation, for instance, short presses toggle fast/slow while press/hold engages the brake. Msg 2 action-release type-control change Pos-1 CCvalue:0-63ĭepending on the algorithm you’re using, but in most cases, you’ll have the delightful benefit of having latching AND momentary action in one switch. (If toggle’s left on, it’ll take two presses to toggle between fast and slow). Toggle mode should be left off with both in position 1. You have to create momentary switch on your morningstar… the way to do that is to program two messages, one press message with a high cc value and one release message with a low cc value, both messages sharing the same cc# and midi channel. For any of you who are having problems getting the h9 performance switch to behave correctly, I thought I’d share this, since there’s not much info out there and seems to be a lot of confusion. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |